Product Specification Sheet

Part Number: USC-IFD-05120

Part Description:

The Intermittent Fault Detection product family is an advanced prognostic and diagnostic tool that is purpose built to supplement traditional automatic test equipment (ATE) and address the decades old issue of intermittent failures. The patented Intermittent Fault Detector™ (IFD™) technology, by Universal Synaptics Corporation, can simultaneously and continuously monitor every circuit path with a Unit Under Test (UUT) for intermittent failures as short as 50 nanoseconds. This state-of-the-art technology is combined with an environmental chamber and vibration table, which simulate the UUT’s operational environment and cause intermittent faults to manifest, creating a system that is unsurpassed in the Intermittent Fault Detection and Isolation System 2.0™ (IFDIS 2.0™). To ensure a complete assessment of a UUT’s wiring integrity, the IFD also has the capability to perform other traditional hard failure tests. Never has there been a more comprehensive and advanced UUT prognostic and diagnostic solution.

Standard configuration of this depot-level member of the IFD product family is 5,120 test points. Configurations in increments of 1,280 test points are available. Refer to the Related Part Numbers specification below.

Automatic Test Equipment ATE Rack - LRU Testing Wire Testing

USC-IFD-05120 Single Rack

IFDIS 2.0 with Environmental Chamber and Vibration Platform

USC-IFD-05120 Dual Rack with Interface Test Adapter, Environmental Chamber, and Vibration Table

Part Specifications:

Integral Computer	4U rugged compact 19″ rackmount chassis, Black E-4000, 19″x7″x18″ Intel Quad Core i7 3.4GHz processor 4GB DDR3 DIMM Video system supports two 4K HDMI displays 1x Internal 512 GB solid state drive 2.5″ Optical drive 5.25 24X SATA DVDRW 1x Front USB 2.0 1x Cooling fan 120mm + removable and washable filter
Test Software	Synapse software – Intermittence, Continuity, Shorts, Fault Isolation, AutoMap, Test Reports
Integrated Multimeter	6.5 Digit fully integrated digital multimeter Calibration not required
Test Interface (Pod)	1,280 G10 Virginia Panel Quick Disconnect interface connector
Cabinet	Cooling – 300 CFM Blower with automatic temperature control Aluminum extrusion and steel Swivel caster and leveling feet Rear access door with lock Front storage drawer
Electrical Service	AC Input Voltage – 100V-120V, 30A, Single Phase Frequency – 50 / 60Hz L5-30P twist lock plug Sequenced Power Distribution – 15A, 16 Outlet Uninterrupted Power Supply – 3000 VA
Size and Weight	Exterior Dimensions – 84” x 22” x 38” System Weight – <1000 lbs. Custom Packaging and Pallet Ramp
Operating Environment	Temperature – 0 to +40 degrees Celsius Storage – -15 to +50 degrees Celsius Relative Humidity – 0 to 80%, Non-condensing Operating Elevation – 0-3000 m Acoustic Noise – 50Dba at 1m front side
Regulatory	MIL-PRF-32516
Warranty	12 Months
Related Part Numbers	USC-IFD-01280, USC-IFD-02560, USC-IFD-03840, USC-IFD-06400, USC-IFD-07680, USC-IFD-08960, USC-IFD-10240

Product Specification Sheet: IFDIS 2.0™ – Intermittent Fault Detection & Isolation System 2.0™

Part Number: USC-IFD-05120

Part Description:

Part Specifications:

Stay Ahead of No Fault Found Challenges

Successfully Subscribed!